Tel: +86-510-87330163

E-mail: hshightech@outlook.com

SiC Silicon Carbide Setter

Heat resistant SiSic Batts, RBSiC fishtail plate setters, silicon carbide kiln shelf introduction Oxide Bonded Silicon Carbide, also called Sic ceramic board used for firing general chinaware and ceramic product (temperature below 1,450°C), is made by SiC bonded by Silicon Oxide (Si2O3), and...

Send InquiryChat Now
Product Details

Heat resistant SiSic Batts, RBSiC fishtail plate setters, silicon carbide kiln shelf introduction

Oxide Bonded Silicon Carbide, also called Sic ceramic board used for firing general chinaware and ceramic product (temperature below 1,450°C), is made by SiC bonded by Silicon Oxide (Si2O3), and technically called "Oxide Bonded Silicon Carbide".
This Sic ceramic board has very high thermal conductivity (almost 10 times higher than mullite refractory) and high radiation rate of Long-wavelength infrared that bring very high heat efficiency toward products.
In terms of cost performance for firing general chinaware and ceramic products, this Sic ceramic board is the most valuable and suitable refractory.

Heat resistant SiSic Batts, RBSiC fishtail plate setters, silicon carbide kiln shelf Typical quality analysis


ITEM

UNIT

INDEX

SIC Chemical Composition: SIC≥

%

90

Physics property

Max. Service Temp.

1550

Refractoriness≥

SK

39

Refractoriness under load(2kg/cm2)≥

1750

Modulus of Rupture at room temp. ≥

Kg/cm2

500

Modulus of Rupture at 1400℃≥

Kg/cm2

550

Compressive strength≥

Kg/cm2

1300

Thermal Expansion at 1000℃

%

0.42-0.48

Apparent Porosity

%

7-8

Bulk Density

g/cm3

2.70-2.75

Thermal Conductivity at 1000℃

Kcal/m.hr.℃

13.5-14.5


We can make SiC Special Shape according to customers’ demand.

It is mainly suitable for sintering of household ceramic in tunnel kiln、shuttle kiln and roller kiln below 1400 degree centigrade. Used with column, the product has stable structure, endure high temperature and great intensity, with no deformation. Good resistance to thermal shock and long life time. This SiC Special Shape life is more than 200 times, at the same time, it has good heat-conducting efficiency because of its big heat-conductivity, it saves more than 30% energy mainly used for lustration fuel kiln by removing plates from sintering household ceramic kiln.            

Heat resistant SiSic Batts, RBSiC fishtail plate setters, silicon carbide kiln shelf Standard Size


8’

350*190

10’

415*233

12’

460*300 

Detail diagram3.jpg 

Our Advantages

a.High quality raw material: we mainly choose raw material from big SiC factory, they are best and largest raw material manufacturer in China. 

b.Short Delivery time: If one container 20-30 days. We also stock some standard-sized tubes and rods, if you need 3-5 pcs, we can delivery soon. 

c. Safe packing: foam paper wrap on tubes and rods before shipping, plastic caps on tube ends to protect inside surface, each rod be protected with cardboard tube. Finally be packed with seaworthy package or in wooden case. 

d. Best after-sale service: Over 60% products are sold to the Southeast Asia, Middle East and Europe, and all products are trusted by domestic and foreign customers. 

OUR SERVICE 

We provide free technical service about our products and application issues.

Free on-site touring and introduction of our factory. 

We provide process design and validation for free.

We can guarantee on-time delivery of samples and goods.

Close follow-up of all orders by special person and keep customers informed timely.

All after-sale request will be responded in 24 hours.

3.3  Packaging&Delivery.jpg 


Hot Tags: SiC silicon carbide setter, China, manufacturers, suppliers, factory, price
Related Products
Inquiry